2/15/2024 Replay: Shortcut Commands, Puck Holder Design, Heart Inlay Precision, Speeding up Rotation in Aspire

Question Timestamps in this Q&A:

• 00:00:00 - Intro
• 00:10:54 - In the new version, is there more shortcut commands and for more buttons?
• 00:12:24 - Help making a puck holder using VCarve Pro.
• 00:23:36 - Trying to make a heart inlay. And he needs to make an exact copy of a heart 0.5 inches larger than the first. To do the whole project, I will also need to create three more hearts getting progressively larger. The most important part is that they must be exactly the same all the way around. I've tried a couple different ways, but around the top of the heart, the gap varies.
• 00:28:54 - Is there a way in Aspire to make the A rotate faster?
• 00:32:45 - I want to model the blade on a windmill. Would it would like to make it two-sided and export it as a STL file So when importing it into a project, it could be used at different angles.
• 00:44:41 - Trying to build a sign using the attached AI files. And by the way, AI he's referring to is Adobe Illustrator, I also have the DXF and EPS files. What would be the best way to attach them to my sign and what toolpath should I show the most details? I was trying to use layers and can make a bulldozer and excavator. Can I make the bulldozer and excavator 3D looking with these files or do I need the STL?
• 01:04:46 - What carving depth do you recommend using a 60 degree quarter inch cut on wide areas that have skinny areas at the end. So when you sand, you don't remove the epoxy as a visual.