1/23/2024 Replay: Optimizing Z Feedrate with Ramping in CNC, Managing Merged Toolpaths, Importing and Creating STL Files, Vectors Not Recognized, and Model vs. Machined Output
Question Timestamps in this Q&A:
00:00:00 - Intro
00:02:09 - Used the general theory of using a Z feedrate of half of his X and Y feed rates, after watching some of your live lessons, you have got me thinking about using the ramp for the Z feed. It would seem to me that if you use the ramp, you could have the Z rate the same as the X and Y feed rate. What do you think of that?
00:05:32 - Created a merged toolpath in his project, and then saved and closed the project. When he reopened the project, one of the toolpaths was no longer in the group. I put it in, and now I can't find a way to put it back where it belongs. Is this possible?
00:11:56 - Can you do a quick run through on how to import and create an STL file from import to toolpaths?
00:25:06 - Having a problem with Vectric not seeing vectors from a vector download in FreePic.
00:27:06 - In making a cribbage board the roughing cut is running the outside of the finish cut, wondering what setting I messed up on.
00:49:25 - This is the model just what I want. However, what gets machined is not what I see.
Did this answer your question?Thanks for the feedbackThere was a problem submitting your feedback. Please try again later.