00:01:13 - I'm making marquee letters, and many of which require bevel cuts. I have been cutting all the parts out on the CNC, is there a way to have the CNC to cut the bevels as indicated in the pictures?
00:27:36 - How do we set up tapered tool and tool database?
00:29:21 - Hoping somebody could help with the VCarve inlay issue I have with Aspire.
00:33:04 - Any suggestions on workholding for this two sided project and their gun grips?
00:36:07 - When creating a sweep profile, is the orientation of the desired profile critical when creating the toolpath.
00:37:15 - Currently working on lesson number 79 to create a wavy American flag. He would like to import the STL file of the wavy flag, but he's not able to get it imported, and he gets an error.
00:39:28 - I need to make a four and an eighth inch diameter hole, one inch deep, and two inch material. Would it be possible or advisable to ramp in a spoil board bit to make this hole?
00:42:03 - Help with making a simple airplane, dome shape is not coming out equal on both sides.
00:44:57 - Attempting to v carve a project and it wants to carve everything out of the project, would like the project to cut on a line.
00:49:21 - How do you set up a diamond drag bit in the tool database?
00:52:29 - Using the quick engrave with the diamond drag, what's the use known cone setting for?
00:53:05 - Is it possible to rotate my project X toolpaths have been created and saved?
00:57:40 - I'm still having a lot of issues just trying to figure out VCarving names, words, etc.
01:01:24 - I was trying to cut a keyhole. The video I watched to set up was showing a polyline that was doubled back on itself. Coming back, left to right, it was supposed to exit. I could not make the bit exit other than the center line of the lines. Any ideas?
Did this answer your question?Thanks for the feedbackThere was a problem submitting your feedback. Please try again later.
